Rewire permit in Rockdale County, Georgia
To get a whole-home rewiring permit in Rockdale County, you file an application with the Planning & Development through Magnet Gov permitting portal, pay the fee (typically $50–$110), and pass rough-in (walls open). Replacing the branch wiring throughout a home — a larger-scope electrical permit, sometimes with rough-in inspections and plan review. Required when replacing branch circuits throughout a dwelling, common with knob-and-tube or aluminum-wiring remediation and gut renovations. PullPermits.ai filing in Rockdale is on the way — join the waitlist to hear when it's live.
- Permit type
- Whole-Home Rewiring
- Also called
- house rewire, electrical rewiring, knob and tube replacement
- Where to file
- Magnet Gov permitting portal
- Typical fee
- $50–$110
- Turnaround
- 2–6 business days
When it's required
When you need a rewire permit
Required when replacing branch circuits throughout a dwelling, common with knob-and-tube or aluminum-wiring remediation and gut renovations.
Typical scope of work
- Replace branch circuit wiring and devices
- New or reworked panel and grounding
- Smoke/CO and AFCI/GFCI to current NEC
- Rough-in before close-up, then final
Common rejection reasons
- Scope/valuation under-stated for the work performed
- Rough-in inspection skipped before close-up
- Missing AFCI/GFCI or smoke/CO compliance notes
Fees
Rockdale County rewire permit fees
Residential electrical permits typically run about $50–$110, plus a 2.95% card surcharge. Rockdale adds a 2.95% card surcharge, paid to the county with the permit fee.
| Charge | Amount |
|---|---|
| Rockdale County rewire permit feeWhole-Home Rewiring permits typically run $75–$250 (often valuation-based) statewide; Rockdale lands in this range. | $50–$110 |
| Card surchargeRockdale County adds this convenience fee — you pay it to the county with the permit fee. | 2.95% |
| PullPermits.ai markup on permit feesYou pay city, county, and inspection fees directly, at exact cost — no markup, ever. | $0 |
Figures are approximate. The city or county sets the final fee, and you pay it on its own payment page at exact cost.
Step by step
How to file a rewire permit in Rockdale County
The full process through Magnet Gov permitting portal.
- 1Confirm the jurisdictionResolve the job address to Rockdale County and confirm a whole-home rewiring is the right permit type for the scope of work.
- 2Prepare credentials and formsHave your active Georgia electrical license, business license, and insurance on file, plus a one-time notarized save affidavit.
- 3Draft the applicationDescribe the rewire scope — replace branch circuit wiring and devices — and attach any required documents.
- 4Review the fee previewCheck the fee breakdown ($50–$110 in Rockdale) before anything is submitted.
- 5File the application in Magnet Gov permitting portalSubmit the whole-home rewiring application and pay the Rockdale County fee.
- 6Track approval and schedule inspectionWait 2–6 business days, then book rough-in (walls open).
Inspections
- Rough-in (walls open)
- Final electrical inspection
Once the permit is issued, you schedule these with Rockdale County.
Typical timeline
3–10 business days; valuation-based fees in some counties.
In Rockdale County specifically, plan on 2–6 business days.
You approve, we file
How PullPermits.ai will pull your Rockdale rewire permit
You stay the named applicant. PullPermits.ai drafts the whole-home rewiring application and files it through Magnet Gov permitting portal under your account — only after you tap approve. You pay the Rockdale County fee directly, at exact cost. Rockdale is on our rollout list; this is how it works in Atlanta today.
- Step 1
Describe the job
Tell us the Rockdale County address and the rewire scope. Your credentials are already on file.
- Step 2
Review the preview
See the full application and the fee breakdown in plain English before anything is filed.
- Step 3
Tap Approve & File
We file with Rockdale County; you pay its fee directly, at exact cost — nothing is submitted until you approve.
- Step 4
Get email updates
We track the status and email you each update until the permit is decided.
Rockdale rewire permit FAQ
- How much is a whole-home rewiring permit in Rockdale County?
- In Rockdale County, a rewire permit typically runs $50–$110. Residential electrical permits typically run about $50–$110, plus a 2.95% card surcharge. Rockdale County also adds a 2.95% card surcharge, paid to the county at cost. PullPermits.ai never marks up the city or county fee.
- How long does a Rockdale rewire permit take?
- 3–10 business days; valuation-based fees in some counties. In Rockdale County specifically, expect 2–6 business days.
- What inspections does a whole-home rewiring need?
- Typically: Rough-in (walls open), Final electrical inspection. You schedule them with Rockdale County once the permit is issued.
- Anything specific about filing a rewire in Rockdale County?
- Runs on Magnet Gov; requires a one-time notarized SAVE affidavit.
- Why do whole-home rewiring permits get rejected?
- The most common reasons: Scope/valuation under-stated for the work performed; Rough-in inspection skipped before close-up; Missing AFCI/GFCI or smoke/CO compliance notes.
Keep exploring
All Rockdale County electrical permits
Fees, portal, requirements, and every permit type for Rockdale County.
Panel upgrade permit in Rockdale
Replacing or upsizing a home's main electrical panel and service — the most common residential electrical permit in metro Atlanta.
EV charger permit in Rockdale
Installing a Level 2 (240V) EV charging circuit — the fastest-growing residential electrical permit as EV adoption climbs.
Generator permit in Rockdale
Permitting a permanently installed standby generator with an automatic transfer switch — often paired with a gas permit.
Working a job somewhere else? Find your jurisdiction by address or read the rewire permit guide.
Be first when Rockdale goes live
Join the waitlist and we'll tell you the day PullPermits.ai starts filing Rockdale County whole-home rewiring permits.