Panel upgrade permit in Rockdale County, Georgia
To get a electrical panel upgrade permit in Rockdale County, you file an application with the Planning & Development through Magnet Gov permitting portal, pay the fee (typically $50–$110), and pass rough-in (if walls opened). Replacing or upsizing a home's main electrical panel and service — the most common residential electrical permit in metro Atlanta. Required whenever the main panel, service conductors, or meter base is replaced or the service amperage is increased (e.g. 100A to 200A). PullPermits.ai drafts the whole application, shows you a preview with the fee breakdown, and files it with Rockdale County the moment you tap approve.
- Permit type
- Electrical Panel Upgrade
- Also called
- service change, heavy-up, service upgrade
- Where to file
- Magnet Gov permitting portal
- Typical fee
- $50–$110
- Turnaround
- 2–6 business days
When you need a panel upgrade permit
Required whenever the main panel, service conductors, or meter base is replaced or the service amperage is increased (e.g. 100A to 200A).
Typical scope of work
- Replace main breaker panel / load center
- Upsize service entrance conductors and meter base
- Bond and ground per current NEC
- Coordinate the utility (Georgia Power) disconnect/reconnect
Common rejection reasons
- Missing or expired electrical license on file
- No load calculation attached when amperage increases
- Job address resolved to the wrong jurisdiction (city vs. county)
PullPermits.ai checks for these before it files, so a Rockdale panel upgrade doesn't bounce back over a fixable detail.
Rockdale County panel upgrade permit fees
Residential electrical permits typically run about $50–$110, plus a 2.95% card surcharge. Rockdale adds a 2.95% card surcharge, itemized on your invoice at cost.
| Charge | Amount |
|---|---|
| Rockdale County panel upgrade permit feeElectrical Panel Upgrade permits typically run $50–$150 statewide; Rockdale lands in this range. | $50–$110 |
| Card surchargeRockdale County adds this convenience fee — itemized on your invoice at exact cost. | 2.95% |
| PullPermits.ai markup on permit feesCity, county, and inspection fees are always passed through at exact cost — no markup, ever. | $0 |
Figures are approximate and verified against the city or county at filing time. The permit fee you see in your PullPermits.ai preview is exactly what the city or county charges.
How to file a panel upgrade permit in Rockdale County
The full process through Magnet Gov permitting portal. Or skip all of it: PullPermits.ai does every step once you approve the preview.
- 1Confirm the jurisdictionResolve the job address to Rockdale County and confirm a electrical panel upgrade is the right permit type for the scope of work.
- 2Prepare credentials and formsHave your active Georgia electrical license, business license, and insurance on file, plus a one-time notarized save affidavit.
- 3Draft the applicationDescribe the panel upgrade scope — replace main breaker panel / load center — and attach any required documents.
- 4Review the fee previewCheck the fee breakdown ($50–$110 in Rockdale) before anything is submitted.
- 5File the application in Magnet Gov permitting portalSubmit the electrical panel upgrade application and pay the Rockdale County fee. With PullPermits.ai, you tap "Approve & File" and we do this for you.
- 6Track approval and schedule inspectionWait 2–6 business days, then book rough-in (if walls opened). PullPermits.ai polls status and texts you each update.
Inspections
- Rough-in (if walls opened)
- Final / service inspection
- Utility release to Georgia Power
PullPermits.ai requests the inspection with Rockdale County and confirms the appointment back to you by text.
Typical timeline
1–5 business days for over-the-counter approval in most counties.
In Rockdale County specifically, plan on 2–6 business days.
How PullPermits.ai pulls your Rockdale panel upgrade permit
You stay the named applicant. PullPermits.ai drafts the electrical panel upgrade application, files it through Magnet Gov permitting portal under your account, and passes the Rockdale County fee through at exact cost — only after you tap approve.
- Step 1
Describe the job
Tell us the Rockdale County address and the panel upgrade scope. Your credentials are already on file.
- Step 2
Review the preview
See the full application and the fee breakdown in plain English before anything is filed.
- Step 3
Tap Approve & File
We file with Rockdale County and pay the fee at exact cost — nothing is submitted until you approve.
- Step 4
Get SMS updates
We poll status, book the inspection, and text you each step to closeout.
Rockdale panel upgrade permit FAQ
- How much is a electrical panel upgrade permit in Rockdale County?
- In Rockdale County, a panel upgrade permit typically runs $50–$110. Residential electrical permits typically run about $50–$110, plus a 2.95% card surcharge. Rockdale County also adds a 2.95% card surcharge, itemized at cost. PullPermits.ai never marks up the city or county fee.
- How long does a Rockdale panel upgrade permit take?
- 1–5 business days for over-the-counter approval in most counties. In Rockdale County specifically, expect 2–6 business days. PullPermits.ai tracks it and texts you the moment it's approved.
- What inspections does a electrical panel upgrade need?
- Typically: Rough-in (if walls opened), Final / service inspection, Utility release to Georgia Power. PullPermits.ai books the inspection with Rockdale County for you once the permit is issued.
- Anything specific about filing a panel upgrade in Rockdale County?
- Runs on Magnet Gov; collects a one-time notarized SAVE affidavit at onboarding. PullPermits.ai has the Rockdale County panel upgrade process encoded, so the right form and any affidavit or account step is handled.
- Why do electrical panel upgrade permits get rejected?
- The most common reasons: Missing or expired electrical license on file; No load calculation attached when amperage increases; Job address resolved to the wrong jurisdiction (city vs. county). PullPermits.ai checks for these before it files, so you don't lose a day to a kickback.
Keep exploring
All Rockdale County electrical permits
Fees, portal, requirements, and every permit type for Rockdale County.
EV charger permit in Rockdale
Installing a Level 2 (240V) EV charging circuit — the fastest-growing residential electrical permit as EV adoption climbs.
Generator permit in Rockdale
Permitting a permanently installed standby generator with an automatic transfer switch — often paired with a gas permit.
Rewire permit in Rockdale
Replacing the branch wiring throughout a home — a larger-scope electrical permit, sometimes with rough-in inspections and plan review.
Working a job somewhere else? Find your jurisdiction by address or read the panel upgrade permit guide.
File your Rockdale panel upgrade permit the easy way
Join the waitlist and let PullPermits.ai draft and file your Rockdale County electrical panel upgrade permit. Review the preview, tap approve — we handle Magnet Gov permitting portal and the fee at cost.